All About Press Reality

5 Things to do to fix door lock - Low Rate Locksmith Sacramento

Feb 6

When a door won’t shut or if a door continues opening on its own, your safety and security are decreased. To keep doors closed, you may need to adjust more than the lock. The door jam could be warping. The hinges might be sagging. The striking plate may be sliding.

Whatever the reason your door won’t shut, there is information in this post that will help you locate your repair. In the event that you are unable to execute the task yourself or wish the expert hands of a professional, you can always contact a Low Rate locksmith Sacramento.

If your door won’t shut, these are the most probable reasons:

Debris \sDoorway \sStrike Pate \sDoor Latch \sHinges \sFAQs
Why does my door continually opening?
When a door won’t shut, it is due to a problem with the door or the lock. But it will always result in the latch or bolt not locking into the striking plate properly. When the lock’s latch bolt is not holding in that catch, the door may open with a blast of wind or merely on its own.

Should you keep doors closed?
It is preferable for safety and security that doors remain closed dependably. Closed doors may prevent theft, aid with privacy, and the Fire Safety Research Institute (FSRI) has concluded that a closed door can save your life during a fire. If your door won’t shut, you are at danger.

How do you keep a door closed without a latch?
It is feasible to lock a door without a lock using door wedges, makeshift barriers, etc. The difficulty with shutting a door without a latch is that these devices hinder the ease of escape. When you cannot leave via a door fast, it represents a safety issue.

Does having a door closed assist with temperature control?
You can insulate a room more effectively when the door is closed. Closing a door reduces ventilation so a room may heat up quickly. For air conditioning, the greater the room being cooled, the more energy and time it requires. When a door won’t shut, the room remains a component of a bigger area.

Is it a security issue when a door won’t close?
If you keep doors closed, it is better for your security. Even inside doors may need to be closed for security when living with roommates. However, not every door is meant for security. Bathroom door locks, for example, are meant to promote seclusion. Whatever a door’s function, it cannot be fulfilled when the door won’t shut.

1. Debris
All kinds of flotsam and jetsam may build in the catch of the striking plate. Wood or material from the door jam might fall away, partly obstructing the catch hole. With the door open, have a look at the hole in the door jam that the latch should be falling into.

In commercial venues as well as industrial settings, strike plates may be purposely jammed with debris. This is a tactic robbers employ so a door won’t shut properly, and they may regain entrance after a building’s usual operation hours. Prison locks commonly encounter this from convicts.

You should also verify that there is not anything resting against the door or catching between the door and the jam. Fabric from coats put on coat racks behind a door may occasionally hinder full closing.

If you are trying to repair sliding door locks, you should also be checking for debris on the tracks. Any additional material on the track of a sliding door might drag the door back. So even if you can bring the sliding door shut, the door won’t remain closed. The period between reopening may vary.

Door Won’t Close Tip #1

Once you discover the debris, you may remove it. If material from the door or jam has come free or broken, you may need to cut or chisel the projecting protrusion. For gunky or sticky items, you should additionally clean the surface with soap and water.
2. Doorway Tolerances

When a door won’t shut correctly, examine the apertures at the top, bottom, and sides of the door. The wood in both solid core doors and hollow core doors may grow to the point where their gaps shut and pull on the doorway.

Interior doors that employ hollow cores are less prone to this form of weathering since they use very little wood. However, the foundation of the house may lift and adjust any doorway tolerance. And with that alteration, modifications to the hinges or strike are ill-advised.


With the foundation moving, roots elevating the ground, or the wood of door jam expanding, you may need to adjust the door itself. Look around the edges of the door and determine the tightest tolerances. Mark how much of the door has to be cut.


These difficulties are likely to increase with time, so whatever you are doing to repair the issue, you need to continue to do it frequently. For improved home security, you should address the cause of the problem and not only concentrate on the symptom of the doorway tolerance.


Door Won’t Close Tip #2


Tight doorway tolerances may keep doors closed even when you want them open and make it so a door won’t shut. If you are having problems opening and shutting a door, this is an indication that the door tolerance is too tight. But if there is no hint of tolerance difficulties, you may require a new lock.


3. Strike Plate Alignment


When any door won’t shut, there is frequently a fault with how the strike plate is placed. Your doorway tolerances altering may produce this problem, as can your hinge alignment. But you can detect and repair the problem by concentrating on the strike plate entirely.


Some patented locks need specific striking plates or deeper catch holes. If this is your problem, it will not be that a door won’t shut, but rather that the lock will not completely engage. This is a crucial difference since it eventually determines the right answer.


If you over-adjust or replace the striking plate every time you change interior door knobs, the door jamb might become more flimsy, and the door will be less secure. When a door won’t remain closed, you do not want to replace it with a door that, when closed, gives absolutely no security.


To keep doors closed, the latch has to fall into the catch of the strike plate. As you shut the door, check at how the latch is aligning with the strike plate. A spring-loaded latch found on door knobs is not meant for physical security, yet you must keep doors closed when necessary.


Door Won’t Close Tip #3


You need to repair the fundamental reason of the strike plate misaligning. If you do not, the condition will reoccur and potentially worsen. You can only enlarge or shift your strike plate so much before you have weakened the door jamb to point it will require total renovation.


4. Stuck Door Latch

When a door continues opening, ensure sure the latch is extending appropriately. A jammed door latch may not completely extend into the catch of the strike plate. You may have to fumble with the handle or press at the latch a few times, but try if you can get the latch to come out.


For most sticky spring-loaded latches, you may add door lock lubricant to the latch and cycle the device a few times. A cycle refers to the whole retraction and expansion of the latch. If the lubrication is functioning, the cycles should get progressively smooth until the sticking is gone.


Lubricant is not always the answer. The difficulty you are facing will decide the best technique to remedy a jammed door latch. The connection between the handle and the latch may be broken totally, or the latch might be stuck every once in a while.


When the reason a door won’t remain closed is restricted to a jammed latch, replacing locks will remedy the problem. This is not the case for all other reasons a door won’t shut. Finding a remedy takes time. For businesses and retail establishments, the ease, and efficiency of commercial door lock replacement.


Door Won’t Close Tip #4


If you replace a door knob with a deadbolt, you are not likely to suffer a sticky latch since the bolt is completely flung. Even when the new lock starts to become sticky, you will be able to see that it is not totally engaged, so you are not astonished if the door continues bursting open.


5. Hinge Alignment


The first thing you can do to check on your hinge alignment is open the door and push and pull it in various directions. If the door wobbles, one of the hinges is definitely loose. Use a screwdriver and tighten the hinge screws and see if this fixes the problem.


The problem with tightening these screws is the hole is getting stripped, which widens the hole and enables the hinges to sag even more over time. To counteract this danger, you may utilize the opportunity to increase front door security by replacing the set screws with 3-inch screws that sink into the stud.


In the case the door does not wobble, and the hinge screws are tight, but the door won’t shut, you may still be able to repair the problem by adjusting the hinges. Minor modifications may be performed using printer paper, cardboard, or other cuttable and compressible flat materials.


Remove the hinge. Stack or fold the sheets to the correct width and position them between the jam and the hinge as you reinstall. The thicker the sheet, the more the door will adapt. Pack the bottom hinge to move the door up, then use the top hinge to bring the door down.


Door Won’t Close Tip #5


Check your door hinges as a part of your routine lock maintenance. If the metal is highly rusted or deformed, consider replacing the hinges. However, the recurrent replacement or readjusting of hinges might worsen concerns with hinge alignment.


Final Words

Instead of seeking up how to replace a door knob when a door continues opening, go through the troubleshooting procedure and discover if there is a problem with the lock, strike plate, doorway, hinges, etc. You may discover that the ideal solution has nothing to do with the lock.


For additional information on what to do when a door keeps popping open, please leave a comment below. And if you would like Low Rate Locksmith to assist fix your issue, discover whether we serve your region.



To talk to a professional locksmith, clients can call Low Rate Low Rate Locksmith Sacramento at (916) 572-5325. Their office is located at 1200 Fulton Ave #323, Sacramento, CA 95825. Visit their website for more information

Company Name*: Low Rate Locksmith Sacramento 

Contact Person: Mike

Phone: 916 572 5325 

Address: 1200 fulton ave #323

City: Sacramento

State: CA

Country*: US